Thursday, October 29, 2026 — Wholesale Blind Factory
For tall, narrow windows, the best choices are roller shades, roman shades and cellular shades hung high and mounted to the full height of the opening, or a vertical-stacking option like fabric or PVC vertical blinds when the window is part of a door or a wide run. A narrow window is mostly about proportion: you want a covering that emphasizes the height, stacks small, and does not leave light gaps down two long sides. Because we build everything to measure at our Coquitlam factory, the width of the opening is rarely a limitation. Here is how to choose.
These windows usually show up flanking a fireplace, beside a front door, in a stairwell, or in pairs along a hallway or dining room. Ask what you need from it before choosing a product:
Roller shades suit narrow openings well. The roll at the top is compact, there is very little hardware to see, and the fabric hangs flat so the window reads as a clean vertical line. Pick light-filtering fabric for softened daylight, blackout where a bedroom or media room needs real darkness, or a solar/PVC-backed fabric on a sunny elevation to cut glare and UV. Mount the shade as high as the frame allows and let it drop to the sill, which exaggerates the height instead of chopping it.
On a narrow window a roman shade adds softness without much bulk, and the folds stack tightly when raised. Flat-fold styles keep the vertical lines crisp; hobbled styles add more fabric and character. Keep in mind that the stack height grows with the length of the window, so on a very tall opening a lined roman will cover a noticeable amount of glass when fully open. If you want the whole pane clear, mount the headrail above the window so the stack sits on the wall.
Tall single panes lose heat in a BC winter and gain it in summer. Cellular (honeycomb) shades trap air in their cells and are the most insulating soft covering we make. They also stack compactly, which matters on a narrow opening. Moisture-tolerant fabrics are available if the window sits in a humid space such as a stairwell near a bathroom or a coastal home that sees condensation.
Faux wood blinds work on narrow windows when you want slat control and the humidity resistance of PVC and composite, although a very tall blind stacks into a thick block at the top. In that case the slat size matters: smaller slats stack tighter. PVC vertical blinds are rarely the first pick for a standalone narrow window, but on a tall glass door or sidelight they are practical and easy to repair vane by vane.
Reach is the practical heart of tall-window design. Three honest options:
Corded coverings sold in Canada must meet Health Canada's cord-length rules, and any long cord on a tall window should be anchored out of reach.
An inside mount looks tidy and shows off the trim, but it needs enough frame depth and a consistent width from top to bottom. Narrow windows sometimes taper slightly, and a small error shows as a light gap. An outside mount mounted wider than the opening and taller than the frame covers the edges and makes the window look larger. Whichever you choose, measure the width at the top, middle and bottom and the height on both sides, and use the smallest width for an inside mount.
When two or three tall windows sit together, order them as a matched set, with the same fabric, headrail height and control side. The eye reads the row as one feature, and a half-inch mismatch in drop height is more obvious than it sounds.
Narrow does not mean simple. The right answer depends on how high the window is, how you reach it, and what the room needs from daylight. Our team can measure the openings, bring fabric swatches to the window and talk through manual versus motorized options. Book a free in-home consultation, or send us your window sizes and we will help you narrow down a quote.