Friday, October 30, 2026 — Wholesale Blind Factory
Yes, you can put blinds or shades over a window with a baseboard heater or radiator beneath it, but the covering should stop short of the heat source rather than hang in front of it. The best fits are inside-mounted roller shades, cellular shades and faux wood blinds cut to sill length, so the fabric never drapes across the heater, plus a clear air gap so warmth can still rise into the room. Avoid long, floor-length coverings in front of a heater, and check your heater manufacturer's clearance guidance before you order.
Builders put baseboard heaters and radiators under windows on purpose. Cold air falls off the glass, and the heat rising from below meets it and keeps the room even. That works only if air can move. A covering that hangs down over the heater, or sits tight against it, traps heat behind the fabric, wastes some of it on the window, and can stress the material over time.
There is also a safety side. Any fabric near a heating element should have clear space around it. We are not a heating company, so the specific clearance is always the heater maker's call: read the label or manual for your unit, and if you are unsure, ask your electrician or heating contractor. What we can do is build the covering so that it ends where you need it to.
For most rooms, the cleanest approach is a covering that finishes at the window sill or the bottom of the glass, not below it.
Measure the window as usual, and then add two more numbers: the distance from the top of the window frame down to the top of the heater, and the depth the heater sticks out from the wall. Those tell us how long the covering can be and whether an inside mount has room to sit flat. If you are unsure how to take those measurements, our measuring guide walks through the common mistakes, and with a free in-home consultation we can take them for you.
A covering over a cold window can make the heater's job easier. Cellular shades slow the heat that escapes through the glass, and a closed roller shade at night adds a layer too. That does not replace good windows, but in an older Metro Vancouver home with single-pane glass, it can make the room feel steadier. For more on that, read reducing heat loss in older homes.
If the room also gets hot in summer, a solar roller shade can take the glare off in July and still stop at the sill in January, so one covering does both jobs. Our guide on shades for summer heat explains how.
If you are not sure what will work around your heater, we are happy to look at it with you. Book a free in-home consultation or visit the Coquitlam showroom, and we will measure, check the clearances and quote a covering that fits the window and the heater. Every order is made to measure in our factory and confirmed by a person.